Posts

Why a Cooling Tower is Needed? The Top Reasons Explained

A cooling tower is a huge heat exchanger which expels the heat of the building into the atmosphere and returns cold water to the chiller. In every high-rise building, you will find big square units with fans on top. These are the cooling towers that are used to cool water. These towers gets warm water, called condenser water from the chiller. It is called so because it gets heat in the condenser of the chiller. The chiller is situated at a lower level like a basement and the cooling tower cools down the water so that it returns to the chiller to take up more heat. Why a Cooling Tower is Needed? A cooling tower is required for heat elimination purposes which works by extracting the waste heat produced as a by-product in industrial setups. This waste heat is taken from the environment through the cooling of hot water to a low temperature. These are energy-efficient and cost-effective systems for cooling purposes. Several industrial settings use a large amount of water to c
Post a Comment
Read more

Why is the Maintenance and Repair of Cooling Towers in NSW Important?

It is important to get your cooling tower repaired and upgraded from time to time as the efficient operation of these towers is crucial for avoiding disruptions to the business. Maintenance is also important for minimizing the safety risk and reducing the excessive cost of energy.  For the maintenance purpose, you must hire trained technicians who are experts in carrying out mechanical inspections and repairs. You can put your trust in the professionals from FlowMatrix for the repair and maintenance of cooling towers NSW . They are good at interpreting the risk management and planning audits to make sure that your business runs smoothly.  The professionals offer a wide array of services right from rebuilding, repairs, and upgrades of the cooling tower. It is to be known that the government standards are getting stringent over the period of time, and the professionals can help you in meeting those standards. Hiring professionals like FlowMatrix is a small investment, which wi
Post a Comment
Read more

Cooling Towers Refurbishment: Adding Life to the Cooling Tower

An industrial cooling tower’s life expectancy is between 15 and 25 years, yet it is not always necessary to install a completely new system; old cooling towers refurbishment can be conducted or upgraded at a fraction of the cost. Refurbishment or upgrades can bring a cooling tower’s components up to original factory specifications, extending the system’s lifespan for another 15 to 20 years. Over time, the humid environment of a cooling tower naturally leads to the build-up of contaminants resulting in clogging of the heat transfer medium and corrosion of metallic components. This build-up diminishes the efficiency of the cooling system and in severe cases can result in the collapse of the cooling tower structure. Plastic components gradually deteriorate over the operating life of the cooling tower becoming brittle and are therefore easily damaged due to maintenance activities or exposure to high winds and icing during winter. Cooling tower refurbishment is achieved by cleani
Post a Comment
Read more

Fundamentals for Cleaner and Safer Cooling Towers

Properly maintained cooling towers and chillers keep condenser temperatures lower than un-maintained systems. FlowMatrix is a cooling tower inspection specialist that knows every brand and model of cooling tower in Australia and provides expert maintenance of your important cooling assets. Their team of skilled technicians offer the assurance of safety, compliance, performance, and efficiency, so you can rest assured your cooling systems are up to code and running perfectly. Here are the fundamentals - 5 steps to take care of industrial cooling towers and chillers: Remove Scale Deposits:  Since your cooling tower works by evaporation, you will experience periodic build-ups of scale deposits on your fill. Minerals within the water will produce these deposits, especially if you’re experiencing water treatment issues. Limescale build-up can decrease the efficiency and performance of your HVAC system and can lead to premature deterioration of your unit. Conduct regular co
Post a Comment
Read more

Heat Reduction Devices – A Thorough Guide

Cooling towers or heat rejection devices are used everywhere, be it homes or offices. There are various types of heat reduction devices available in the market.    What is a heat reduction device? And how does it work?  A heat reduction device or water tower extracts waste heat from the building to the atmosphere through a cooling water stream to lower temperatures. The type of heat rejection through a wet tower is termed as evaporative. It allows a small portion of the water being cooled to evaporate into a moving air stream, which provides significant cooling to the rest of that water stream.  The air from the water stream is then transferred to the air that raises the temperature of the air and relative humidity level to 100 percent. The air then gets discharged into the atmosphere. The evaporated heat rejection device or equipment such as wet towers is commonly used to provide significantly lower water temperatures than dry or air cooled heat rejection devices can giv
Post a Comment
Read more

What are Cooling Tower Solutions?

Image
A cooling tower refers to a specialised heat exchanger in which the air and water are brought into direct contact with one another with the motive of reducing the temperature of water. When this process takes place, a small volume of water gets evaporated which in-turn reduces the temperature of the water being circulated through the tower.  Industrial processes or air-conditioning condenser tends to heat up the temperature of water. The water, in order to cool down, is then pumped to the cooling towers through pipes.  The water sprays through the pipes in the banks of a material called "fills" that slows down the flow of water through the cooling towers and tries to expose the surface of the water to the air for further process of decreasing the water temperature. The water, after it cools down, is pumped back to the condenser or process equipment where it absorbs heat.  The process is very essential for the industries and equipment since, without a go
Post a Comment
Read more