Why a Cooling Tower is Needed? The Top Reasons Explained


A cooling tower is a huge heat exchanger which expels the heat of the building into the atmosphere and returns cold water to the chiller. In every high-rise building, you will find big square units with fans on top. These are the cooling towers that are used to cool water. These towers gets warm water, called condenser water from the chiller. It is called so because it gets heat in the condenser of the chiller. The chiller is situated at a lower level like a basement and the cooling tower cools down the water so that it returns to the chiller to take up more heat.

Why a Cooling Tower is Needed?

A cooling tower is required for heat elimination purposes which works by extracting the waste heat produced as a by-product in industrial setups. This waste heat is taken from the environment through the cooling of hot water to a low temperature. These are energy-efficient and cost-effective systems for cooling purposes.

Several industrial settings use a large amount of water to cool their plants. Cooling towers are also needed in large commercial HVAC systems for the purpose of giving comfort cooling. HVAC systems are widely used in schools, hospitals, large office buildings, etc. The industrial cooling towers are usually much larger than HVAC systems.

Their aim is to remove the heat absorbed in the circulating cooling water systems in petroleum refineries, power plants, natural gas processing plants, petrochemical plants, food processing plants, etc.

Due to the growth of the population at a fast pace, there is a lot of demand for manufactured products. Thus, the industrial sectors have sprung into action and are manufacturing the products in huge quantities to meet this demand.

Thus, more manufacturing heat is being generated. There is a need to cool the heat continuously which is produced by the machines and processes. Installing a cooling tower is the most effective, dynamic, and cost-efficient solution to use the waste heat.

If you are looking for a company for cooling towers in Victoria, then FlowMatrix is the best choice. It is an Australia owned and operated company that concentrates in repair, maintenance, inspection, and installation of the cooling towers in industrial and commercial setups all over Australia. They have an experience of 30 years and boats of well-skilled and proficient technicians. They aim to deliver reliable services and ensure that the cooling systems remain in the running condition for a longer time. They also have experts who can interpret the Risk Management Plan (RMP) audits to fix the issues of the cooling towers and make sure they comply with all the government regulations and safety standards. 


Comments

Post a Comment

Popular posts from this blog

Why is the Maintenance and Repair of Cooling Towers in NSW Important?

It is important to get your cooling tower repaired and upgraded from time to time as the efficient operation of these towers is crucial for avoiding disruptions to the business. Maintenance is also important for minimizing the safety risk and reducing the excessive cost of energy.  For the maintenance purpose, you must hire trained technicians who are experts in carrying out mechanical inspections and repairs. You can put your trust in the professionals from FlowMatrix for the repair and maintenance of cooling towers NSW . They are good at interpreting the risk management and planning audits to make sure that your business runs smoothly.  The professionals offer a wide array of services right from rebuilding, repairs, and upgrades of the cooling tower. It is to be known that the government standards are getting stringent over the period of time, and the professionals can help you in meeting those standards. Hiring professionals like FlowMatrix is a small investment,...
Read more

Heat Reduction Devices – A Thorough Guide

Cooling towers or heat rejection devices are used everywhere, be it homes or offices. There are various types of heat reduction devices available in the market.    What is a heat reduction device? And how does it work?  A heat reduction device or water tower extracts waste heat from the building to the atmosphere through a cooling water stream to lower temperatures. The type of heat rejection through a wet tower is termed as evaporative. It allows a small portion of the water being cooled to evaporate into a moving air stream, which provides significant cooling to the rest of that water stream.  The air from the water stream is then transferred to the air that raises the temperature of the air and relative humidity level to 100 percent. The air then gets discharged into the atmosphere. The evaporated heat rejection device or equipment such as wet towers is commonly used to provide significantly lower water temperatures than dry or air cooled heat reject...
Read more

Fundamentals for Cleaner and Safer Cooling Towers

Properly maintained cooling towers and chillers keep condenser temperatures lower than un-maintained systems. FlowMatrix is a cooling tower inspection specialist that knows every brand and model of cooling tower in Australia and provides expert maintenance of your important cooling assets. Their team of skilled technicians offer the assurance of safety, compliance, performance, and efficiency, so you can rest assured your cooling systems are up to code and running perfectly. Here are the fundamentals - 5 steps to take care of industrial cooling towers and chillers: Remove Scale Deposits:  Since your cooling tower works by evaporation, you will experience periodic build-ups of scale deposits on your fill. Minerals within the water will produce these deposits, especially if you’re experiencing water treatment issues. Limescale build-up can decrease the efficiency and performance of your HVAC system and can lead to premature deterioration of your unit. Conduct regula...
Read more